Hydraulic pumps
matched to your
system demand.
Gear pumps, vane pumps and piston pumps from Parker, Eaton, Danfoss and Bonfiglioli — selected and sized to your flow rate, pressure rating and mounting requirements by engineers who build complete hydraulic systems.
The heart of
every hydraulic
power pack.
The hydraulic pump converts mechanical power into fluid power. Every other component in the circuit — valves, actuators, motors — depends on the pump delivering the right flow at the right pressure, reliably, over the service life of the installation. Undersizing causes cavitation and overheating. Oversizing wastes energy and increases heat load. Selecting the wrong pump type for the duty cycle causes premature failure.
Because Fluidline engineers design and build complete hydraulic power packs — and commission them at customer sites — we approach pump supply with real application knowledge. We specify displacement, pressure rating, mounting standard and shaft configuration based on what the system actually requires, not what is easiest to stock.
We supply gear pumps, vane pumps and axial piston pumps (fixed and variable displacement) from Parker Hannifin, Eaton, Danfoss and Bonfiglioli. Service kits, shaft seals and replacement units are available for all brands we supply.
Technical
range overview.
Specifications below represent the range we routinely supply. Custom displacements and through-drive configurations available on enquiry.
| Pump types | External gear pumps, internal gear pumps, vane pumps, axial piston pumps (fixed displacement), axial piston pumps (variable displacement), radial piston pumps |
|---|---|
| Displacement range | 5 cc/rev to 250 cc/rev (gear and piston); 7–180 cc/rev (vane) |
| Maximum operating pressure | Up to 350 bar (piston); up to 210 bar (gear); up to 175 bar (vane) |
| Maximum speed | Up to 3,000 rpm (gear); up to 2,500 rpm (piston); up to 2,000 rpm (vane) |
| Mounting standard | SAE A, SAE B, SAE C flange; metric IEC flange; through-drive configurations available |
| Shaft options | Splined (SAE), keyed, tapered, male and female variants |
| Port configuration | SAE flange (O-ring face seal), BSP threaded, NPT threaded |
| Rotation direction | Clockwise, anti-clockwise, bi-directional (model dependent) |
| Variable displacement control | Pressure compensator, load sensing, torque limiter, electrohydraulic proportional (on Parker and Eaton axial piston series) |
| Fluid compatibility | Mineral hydraulic oil (standard), water-glycol (HFC) and fire-resistant fluids (selected models) |
| Volumetric efficiency | Gear: 85–92%; Vane: 88–93%; Piston: 93–98% |
| Brands supplied | Parker Hannifin, Eaton, Danfoss, Bonfiglioli |
Approved brands
with genuine
engineering support.
Full Pump Range
Parker PGP/PGM gear series, PV axial piston series (variable displacement with load sensing), and P1/P2/P3 piston pumps. Trusted for crane and heavy industrial applications.
Vickers & Char-Lynn
Eaton Vickers V/VQ vane pumps and PVH/PVB piston pumps. High pressure rating and long service life. Compatible with legacy Vickers installations.
Series 45 & H1
Danfoss Series 45 and H1 axial piston pumps for mobile and industrial closed-loop drive systems. Excellent efficiency and load-sensing control.
Integrated Drives
Bonfiglioli hydraulic pump and motor combinations for integrated drive systems on conveyors, winches and mobile machinery.
Three pump families
for every
duty requirement.
Gear Pumps
External and internal gear pumps for general-purpose hydraulic power packs. Fixed displacement, robust construction, low cost and easy maintenance. Rated to 250 bar. Ideal for presses, cylinders, machine tools and general hydraulic systems.
Vane Pumps
Low-noise vane pumps for machine tool and industrial hydraulic applications where quiet operation is a requirement. Good efficiency and moderate pressure rating to 175 bar. Available in fixed and pressure-compensated variants.
Axial Piston Pumps
High-efficiency fixed and variable displacement axial piston pumps for demanding applications to 350 bar. Variable displacement with load sensing minimises energy consumption in crane hoists, injection moulding and servo-hydraulic systems.
Industries and
systems we serve.
More than a
distributor.
System-Level Sizing
We size pumps to your actual circuit requirements — flow rate, pressure, duty cycle, prime mover speed. Not to a generic table. A correctly sized pump lasts longer and runs cooler.
Complete Power Pack Supply
We supply pumps as part of complete power packs — with prime mover, reservoir, filtration and valves — assembled and tested in our Kundli facility before dispatch.
Spares & Service Support
Service kits, shaft seals and replacement units are available for all brands we supply. We help you plan preventive maintenance schedules to maximise pump life.
Common
questions.
What is the difference between a gear pump and a piston pump — which suits my application?
Do you supply variable displacement hydraulic pumps?
How often do hydraulic pumps need service kits or replacement?
What pressure rating do I need for my hydraulic system?
Can you specify the entire power pack including pump, motor and tank?
Specify the right
pump for your
system.
Share your required flow rate, operating pressure, prime mover speed and application. Our engineering team will recommend the correct pump type, brand and displacement — and quote within 24 hours.