Hydraulic hose
supplier
India.
High pressure hydraulic hosepipes in single, double and four-wire braided constructions. SAE 100 R1 to R12 standards. Sizes 1/4" to 2". Pressure ratings to 420 bar. Temperature range −40 to +100 °C. Crimped assemblies cut to length and supplied same day.
The right hose
for every
pressure range.
Hydraulic hose selection is a critical engineering decision. An under-rated hose in a high-pressure circuit is a safety hazard. An over-specified hose adds unnecessary cost and weight. Getting it right requires knowledge of system pressure (including spike conditions), fluid type, temperature, bend radius and the fitting connection standard — and that is exactly the knowledge we bring when we help customers specify assemblies.
Fluidline stocks a comprehensive range of hydraulic hose from 1/4" to 2" in 1SN, 2SN, 4SP and 4SH constructions, covering working pressures from 35 bar for low-pressure return lines up to 420 bar for high-pressure circuits on heavy equipment. All hose is sourced from approved manufacturers with material certificates available on request.
We supply cut-to-length hose, bare ends for field fitting, and complete crimped assemblies with your choice of end fittings. Standard assemblies are crimped at our facility and available for same-day collection or next-day dispatch. Our engineering team is available to help specify the correct hose and fitting combination for your application.
Engineering
specifications
at a glance.
| Hose Standards | SAE 100 R1, R2, R12, R13, R15 / EN 853 1SN, 2SN / EN 856 4SP, 4SH |
|---|---|
| Size Range | 1/4" to 2" (DN 6 to DN 51) |
| Max Working Pressure | Up to 420 bar (4-wire spiral, small bore) |
| Burst Pressure | Minimum 4× working pressure (safety factor) |
| Temperature Range | −40 °C to +100 °C continuous |
| Inner Tube | Oil-resistant synthetic rubber (NBR); PTFE available on request |
| Reinforcement | 1-wire braid (1SN) / 2-wire braid (2SN) / 4-wire spiral (4SP/4SH) |
| Outer Cover | Abrasion and weather-resistant synthetic rubber |
| Fluid Compatibility | Petroleum-based fluids, water-glycol, most fire-resistant hydraulic fluids |
| End Fittings | BSP, NPT, JIC 37°, ORFS, metric DIN — crimp or reusable |
| Supply Form | Cut to length (bare), or complete crimped assembly |
| Certificates | Material test certificates available; batch traceability maintained |
Stocked, crimped
& ready to ship.
Full Size Range
1/4" to 2" bore in all major construction types kept in stock. No waiting for procurement on standard sizes — most assemblies can be cut, fitted and crimped within the day.
On-Site Crimping
Our Kundli facility is equipped with hydraulic crimping machines capable of handling all hose sizes up to 2". Assemblies are crimped to manufacturer-specified dimensions and visually inspected before supply.
Application Engineering
Not sure which hose type or pressure rating suits your system? Our engineering team will specify the correct hose construction, size and end fitting based on your system pressure, fluid and routing requirements.
Matched End Fittings
End fittings are sourced to match the hose manufacturer's crimp specification. Mixing hose and fittings from unmatched sources is a common cause of assembly failure — we always supply matched combinations.
Material Certificates
Hose material test certificates and batch traceability records are maintained and available on request. Required for quality-critical applications in process, power and defence sectors.
OEM Volume Supply
We supply hose assemblies to OEM customers on scheduled delivery agreements. Consistent batch traceability, fixed specifications and reliable lead times for production line supply.
1-wire, 2-wire
& 4-wire
spiral types.
1-Wire Braid (1SN / R1)
Single high-tensile wire braid reinforcement. Working pressures up to 160 bar depending on bore. Lightweight and flexible. Suited to low and medium pressure return lines, pilot lines and case drain circuits. SAE 100 R1 / EN 853 1SN.
Request supply2-Wire Braid (2SN / R2)
Double high-tensile wire braid for working pressures up to 250 bar. The most commonly specified hose for general hydraulic systems on industrial machinery, cranes and mobile equipment. SAE 100 R2 / EN 853 2SN.
Request supply4-Wire Spiral (4SP / 4SH / R12)
Four-wire spiral reinforcement for very high pressure circuits up to 420 bar. Suited to heavy hydraulic equipment, high-pressure cylinder circuits, grab and unloader systems. SAE 100 R12 / EN 856 4SP / 4SH.
Request supplyIndustries we
supply hose
assemblies to.
Hydraulic hose is required wherever a fixed pipe circuit needs a flexible connection — at actuator interfaces, rotating joints and service points. Our hose supply covers:
Why engineers
source hose from
Fluidline.
Specification Support
We do not just sell hose — we help you specify it correctly. System pressure, fluid type, temperature and routing all affect the right choice. Our engineering knowledge means fewer callbacks for wrong specifications.
Same-Day Assemblies
For urgent breakdowns and maintenance requirements, we stock the most commonly needed sizes and can crimp standard assemblies the same day. For planned maintenance, we supply batch-traceable assemblies on scheduled delivery.
Matched Hose & Fittings
Every assembly uses matched hose and fittings from the same approved supply chain. We do not mix brands — the crimped assembly performs to the rated specification because every component in it is correct.
Frequently
asked questions.
What pressure rating do I need for my hydraulic system?
Can you crimp hose assemblies on site or at short notice?
What is your lead time for custom hose assemblies?
What is the temperature operating range for your hydraulic hose?
Do you stock obsolete or non-standard fittings?
What hose standards do you supply to?
Tell us your
pressure, size
& quantity.
Share your system pressure, hose size, end fitting requirements and quantity. Our team will confirm the correct hose construction, specify the end fittings and provide a competitive price within 24 hours.